[Home] [Search] [FAQ]
	Bedford CF-UK Message Board > CF Blog Spot > Cylinder head.
	[Private Message] [Register] [Profile] [Member list] [Log-in]

Author	Message
Dougie Gearbox Technician Posts : 237 Location : Perth, Scotland Status    : Offline	Cylinder head. Hi to all, The search for a cylinder head has born fruit and I have found one, it should be here in a few days which will allow me to complete the Bedford engine I have rebuild. All I will need then is the weather to change from snow wind and rain so that the job can begin. The first head I saw was on E Bay but the guy wanted £500.00 pounds for it and it looked like it needed some work, this one will cost £280.00 including carriage, not cheap but it is in much better shape with no work to be done. That will make the total cost of this engine rebuild £1,850 pounds. doujoy
Tue 11 Feb 2020 @ 12:27
Dougie Gearbox Technician Posts : 237 Location : Perth, Scotland Status    : Offline	Headwork. Hi to all, Revamped an old cam-box today ready for the cylinder head when it arrives, complete with cam-shaft followers and adjustment screws checked out to make sure all was working as it should. Another step nearer to having an engine complete and ready to be fitted. doujoy
Thu 13 Feb 2020 @ 19:36
Time in GMT

[Post Reply]
New posts since your last visit	Administrative Functions: Open/Close/Delete Thread / Move Thread
Old post

Back to the CF-UK Homepage ][ Email CF-UK

Powered by FunkBoard vCF0.74c